We are here to help
Instructions, troubleshooting, safety information, and direct support.
Unbox kit
Remove BondWerks ONE CA bottle and activator spray from packaging.
Prepare surfaces
Clean both surfaces -- remove dust, oil, and old adhesive. Dry thoroughly.
Apply CA glue
Apply a thin bead to one surface using the precision tip.
Position parts
Align and press parts together firmly. Ensure full contact across the joint.
Spray activator
Spray BondWerks Activator from 15-20 cm for rapid, even cure.
Hold and set
Hold steady until set. Handling strength is achieved rapidly.
Use safely, work confidently
Cyanoacrylate adhesive requires basic precautions. Here's what to know.
Safety Summary
Cyanoacrylate bonds skin and eyes quickly. Use eye protection and work in a well-ventilated area. This is a standard precaution for all CA adhesives.
Eye Protection
Wear safety glasses when using CA adhesive. Seek immediate medical attention for eye contact.
Ventilation
Work in a well-ventilated area. CA vapours can irritate eyes and respiratory passages.
Skin Contact
If skin is bonded, soak in warm soapy water and gently peel apart. Do not force.
Get in touch
Questions about materials, application, or your order? We're here.
Or email us directly at support@bondwerks.com